Redsail Cutting Plotter Manual do Utilizador descarregar pdf (Página 10)

If you use a serial cable between cutter and computer, use the Com port available,

normally is Com1 or Com2. (9 Pin Male on your computer)

After Com port selection, click on Accept/Save

Serial cable connection.

Your Cutter

Vinyl Cutter User Manual V5.0

Cutter serial port

(9 Pin female)

USB cable connection.

See next page ...

Cutter USB port

USB cable

WinPCSIGN Cutter configuration

Vinyl Cutter User Manual V5.0

Click the REFRESH button to close the USB port selection window and click the

Accept/Save button.

If the printer driver does not appear in the list.

1) Close the window “Select USB plotter” by clicking the “Cancel” button or “X”

2) Close the window “Setup plotters” by clicking the “Cancel” button or “X”

a) Connect the computer and the cutter using the USB cable, turn the cutter power

On.

b) If Windows detects a new peripheral it will generally ask for the printer driver; this

driver is provided with your cutter.

c) Install the driver. If the driver is already installed, Windows will complete the

installation.

d) Begin again the cutter configuration procedure, this time the USB driver will be

visible select it.

Your cutter model

If your cutter is configured to USB, Insert the Mini CD-

Rom and click Select USB Plotter button to select the

proper USB cutter driver installed.

if your cutter USB driver is

not in the list?

USB cable connection.

USB cable driver Cd-Rom

1 2 3 4 5 6 7 8 9 10

Sem comentários

Redsail Cutting Plotter Manual do Utilizador Página 10